Mission Style End Table with Slate, Part 2

Here is the table top with the slate installed. I sprayed it with Deft Clear Wood Finish, a lacquer finish with a satin sheen. Both the wood and the slate were sprayed. The lacquer added more amber color to the top making it a bit darker than I wanted. I'm starting to have reservations about using slate. The finish highlights any scratches and the surface is too bumpy. I plan to attach the top with screws so I can change it later if I get motivated.

I want to have an enclosed shelf underneath the top to store books and other stuff. To make it challenging, I'm trying to have curved sides to match the curve in the top. I've never tried bending wood before because it looked pretty involved. I wanted to see whether I could just veneer quarter-sawn oak to ⅛" MDF and bend it to the curve I needed.
To experiment, I've cut 15° angle slots into what would be the table legs. I've screwed a board to the legs and wedged a narrow board under the MDF at the peak of the curve. I was worried that the curved veneer would flex when pushed, but it's very stiff. This may work!